Kreativity » Impressum

Impressum

These details provide legally required company and contact information for KREATIVITY.

01. Company Identification

KREA Swiss AG
Marktgasse 43
4310 Rheinfelden AG
Switzerland

Kreativity is a brand of KREA Swiss AG and is used for selected products that are distributed directly to end customers

02. Registration

Registered in the Commercial Register of the Canton of Aargau
UID / CHE No.: CHE-106.287.361
Official publication: SHAB

03. Business Model Notice

KREA Swiss AG sells its products exclusively to commercial customers (B2B). No sales are made to private individuals within the meaning of consumer protection law.

Orders by natural persons are permitted only in the context of an entrepreneurial activity and under business terms and conditions applicable to commercial customers.

04. Legal Basis

This imprint is provided in accordance with the legal requirements of the Swiss Code of Obligations (OR) and the Swiss Unfair Competition Act (UWG), and, for access from Germany, Section 5 of the German Digital Services Act (DDG, formerly TMG).

05. Liability Disclaimer

The contents of this website have been created with the greatest possible care. However, KREA Swiss AG assumes no liability for the accuracy, completeness, or timeliness of the information provided. Technical changes, errors, and misprints are reserved.

As a service provider, KREA Swiss AG is responsible for its own content on these pages in accordance with the applicable legal provisions. Liability for material or immaterial damages arising from the use or non-use of the information provided is excluded, unless there is demonstrable intent or gross negligence.

06. External Links

This website contains links to external third-party websites over whose content we have no control. No liability is assumed for these external contents.

At the time of linking, no unlawful content was identifiable. Permanent monitoring of the content of linked pages is not reasonable without concrete indications of a legal violation.

07. Copyright

The content and works created by KREA Swiss AG on this website are subject to Swiss copyright law. Any reproduction, processing, distribution, or other use beyond the limits of copyright law requires the prior written consent of KREA Swiss AG.

08. Contact

For any questions about this impressum, please contact KREA Swiss on:

Account

Your Cart

No products in the cart.

Shop

Products

Company

Support

[wpforms id="6314" title="false"]
Behatte-mit-Deckel-hd

Container 700ml with lid

  • hotCHOC+, multiSPRAY+, volumeSPRAY

700ml container with lid designed for use with KREATIVITY sprayers. Suitable for storing and dispensing materials used during spraying.

The container is safe for heating contents up to 80°C and allows quick switching between materials during operation.

Flat-Jet-Nozzle-hd

Flat-Jet Nozzle

  • hotCHOC+, multiSPRAY+, volumeSPRAY

Flat jet nozzle designed for KREATIVITY multiSPRAY+, volumeSPRAY and hotCHOC+ sprayers. Produces a linear 0.7mm spray pattern suited to controlled directional spraying and even surface coverage.

Commonly used when coating trays, applying consistent layers or directing spray across narrow sections during food preparation.

bent-nozzle-shorter-os-hc-hd

Short Nozzle Extension

  • hotCHOC+

Bent stainless steel nozzle extension designed for KREATIVITY hotCHOC+ sprayers. The angled extension redirects the spray direction, allowing more precise application on horizontal surfaces, tight areas or locations where direct spraying is difficult.

Provides improved control when applying heated chocolate and similar materials during preparation or finishing tasks.

bent-nozzle-extension-ms-vs-hd

Long Nozzle Extension

  • multiSPRAY+, volumeSPRAY

Bent stainless steel nozzle extension designed for KREATIVITY multiSPRAY+ and volumeSPRAY sprayers. The angled extension redirects the spray direction, allowing easier application of food materials onto horizontal, vertical or angled surfaces.

Improves reach and control when spraying in baking and food preparation environments.

Piston-spring-for-volumespray-hd

Piston Spring

  • volumeSPRAY

Replacement piston spring designed for the KREATIVITY volumeSPRAY sprayer. The spring provides the tension required for proper piston return during the pumping cycle.

Maintaining correct spring tension supports consistent pump function during spraying operations.

Piston-spring-for-tex25-hd

Piston Spring

  • hotCHOC+, multiSPRAY+

Replacement spring for the piston mechanism in KREATIVITY multiSPRAY+ and hotCHOC+ sprayers. The spring provides the tension required for the piston to return during the pumping cycle.

Restoring proper spring tension helps maintain correct sprayer operation and consistent performance.

KREBS-R8-round-nozzle-hd

Round-Jet Nozzle R8

  • hotCHOC+, multiSPRAY+, volumeSPRAY

0.8mm round jet nozzle designed for spraying high-viscosity materials. Compatible with all food spray guns and suited to applications where thicker materials require a larger nozzle opening.

Supports controlled dispensing and consistent spray output during use.

R6-gun-nozzle-hd

Round-Jet Nozzle R6

  • hotCHOC+, multiSPRAY+, volumeSPRAY

0.6mm round jet nozzle designed for spraying low to medium viscosity materials. Compatible with hotCHOC+, multiSPRAY+ and volumeSPRAY sprayers.

The R6 nozzle produces a round spray pattern suitable for materials that require slightly higher flow than finer nozzle sizes.

R4-round-nozzle-hd

Round-Jet Nozzle R4

  • hotCHOC+, multiSPRAY+, volumeSPRAY

0.4mm round jet nozzle designed for spraying low-viscosity materials. Compatible with hotCHOC+, multiSPRAY+ and volumeSPRAY sprayers and intended for applications where a fine, controlled spray is required.

The nozzle produces a focused round spray pattern that works well when spraying thinner liquids.

multispray-spare-piston-hd

Piston Assembly

  • hotCHOC+, multiSPRAY+

Replacement 5.5mm piston designed for the KREATIVITY multiSPRAY+ and hotCHOC+ sprayers. The piston forms part of the internal pump mechanism responsible for generating pressure during spraying.

Correct piston sizing is required when using the matching 5.5mm pump housing to maintain reliable spraying performance.

Wingscrew-hd

Wing Screw

  • hotCHOC+, multiSPRAY+, volumeSPRAY

Threaded wing screw used to secure components on KREATIVITY food sprayers. The screw allows parts to be tightened or removed by hand during assembly, adjustment or cleaning.

Used as a standalone replacement part for hotCHOC+, multiSPRAY+ and volumeSPRAY units.

suction-tube-with-sieve-tes25-hd

Suction Tube

  • hotCHOC+, multiSPRAY+, volumeSPRAY

Replacement suction tube with an integrated sieve that sits inside the KREATIVITY sprayer containers. The built-in filter screens material before it enters the pump system during operation.

Filtering material at the container helps maintain consistent spray performance and reduces the risk of blockages.

susction-tube-extension-hd

Suction Tube Extension

  • multiSPRAY+, volumeSPRAY

The suction tube extension allows users to operate the KREATIVITY volumeSPRAY and multiSPRAY+ guns using a larger floor-based container instead of the standard bottle. It connects to the sprayer to draw material directly from the external container during operation, allowing for greater reach, flexibility and output.

Not suitable for chocolate or other heat-sensitive materials.

Pump-Housing-ms-tex25-hd

Pump Housing

  • hotCHOC+, multiSPRAY+
Pump housing designed for the KREATIVITY multiSPRAY+ and hotCHOC+ sprayers. Provides the correct interface for the pump and flow components and restores normal operation when the original housing becomes worn or damaged. This version is compatible only with the 5.5 mm piston.
pump-housing-volumespray-hd

Pump Housing

  • volumeSPRAY

Replacement housing unit designed for the KREATIVITY volumeSPRAY sprayer. The pump housing forms the main pump body required for correct suction and spraying performance.

Damage, cracking or wear to the housing can affect normal pump operation and spraying performance.

power-washer-jet-nozzle-hd

Power Washer Jet Nozzle

  • multiSPRAY+, volumeSPRAY
Jet nozzle designed for KREATIVITY multiSPRAY+ and volumeSPRAY sprayers. This attachment creates a narrow, high-energy jet stream suitable for removing grease and residues from trays, ovens and other surfaces when a concentrated cleaning stream is required.
volume-spray-piston-assembly-hd

Piston Assembly

  • volumeSPRAY

Replacement piston assembly designed for the KREATIVITY volumeSPRAY sprayer. The piston forms part of the internal pump mechanism responsible for generating pressure and moving material during spraying.

Correct piston operation is required to maintain consistent pressure and material delivery during use.

nozzle-insulation-sleeve-hd

Nozzle Insulation Sleeve

  • hotCHOC+

Thermal insulation sleeve designed for the KREATIVITY hotCHOC+ sprayer nozzle. It helps maintain material temperature around the nozzle area, keeping chocolate fluid and reducing thickening during use.

Maintaining temperature at the nozzle supports more consistent spraying performance, particularly with cocoa-butter-heavy mixtures.

control-knob-hd

Control Knob

  • hotCHOC+, multiSPRAY+, volumeSPRAY

Power and flow control knob compatible with KREATIVITY multiSPRAY and volumeSPRAY sprayers. It is used to adjust output during operation, allowing the user to control the level of spray.

Worn or damaged knobs can affect adjustment and control during use.

HALF-BALL-ATOMISERS_profile_single_640x640 (3)

Atomiser Inserts

  • hotCHOC+, multiSPRAY+, volumeSPRAY

2x Atomiser inserts designed for KREATIVITY food sprayers that convert flowing material into a controlled spray pattern during application. This updated version includes an integrated half ball, replacing the separate internal valve ball used in earlier systems.

Supplied as a set of two replacement inserts.

700ml_thermal_container

Insulation Sleeve 700ml

  • hotCHOC+

Insulation sleeve designed for the 700ml hotCHOC (hC) container. The sleeve helps maintain the temperature of chocolate and other heated materials when working with a spare or backup container.

Reducing heat loss during use supports more consistent material viscosity and spraying performance.